Ferroscan system
Ferroscan system
Ferroscan system
Ferroscan system
Ferroscan system
Ferroscan system

TP709

The model: TP709 can use images to truly present the distribution of steel bars and impurities inside the concrete structure, and test the number of steel bars inside the concrete structure, the thickness of the protective layer and the spacing of steel bars. The test is completely free from the influence of the hoop bars, and can test the inclined steel bars and dense steel bars.



Get Wholesale Price
Share:

TP709 can use images to represent the distribution of steel bars and impurities in concrete structures, and test the number of steel bars, the thickness of protective layer and the spacing of steel bars in concrete structures. This test is not affected by steel bars, and can test inclined steel bars and strong steel bars.

Characteristic
Integrated display screen provides visualization of armor design in top view and section view for on-site structural analysis.
Intelligent algorithm helps to accurately measure the depth of steel.
The large area of the sensor allows scanning a large area quickly and easily.
Record the scanned data of documents and structural analysis.


TECHNICAL PARAMETERS

Display image: Color display the thickness of protective layer of railing, and at the same time display the thickness of protective layer of railing and railing spacing.
Test range of protective layer thickness: 0-210mm (the larger the bar diameter, the deeper the test depth).
Scope of application: φ 6 ~ φ 50 mm standard strengthening.
Positioning accuracy: 1% or 1 mm.
Maximum scanning distance: 50m, real-time scanning and recording.
Statistical function: display the position, protective layer thickness, deviation and qualified rate of the specified channel steel bar at any time.
Fixed-point test: 1 ~ 6 times, users can freely adjust the test value list.
Scanning area grid setting: 600*600mm or 1200 * 1200 mm.
Area scanning: The software can merge the image scanning data.
Filtering range: 0~200mm, which is beneficial to remove invalid data.
Trajectory selection function: 1 to 7 optional.
Component type: all component types can be selected according to the status.
Data storage capacity: not less than 32G (expandable SD card)
Data interface: USB (can be used as a card reader)
Data transmission speed: 4MB/s
Screen type: 480x320 TFT LCD dot matrix, touch screen, capacitive screen.
Power supply: battery working voltage is 7.1 ~ 8.4V..
Battery life: 24 hours
Protection grade: IP54
Weight: 1.2 kg
Size (mm):240*132*135
The relative humidity of air is 90%
The working temperature is-10 ~ 50 C, and the storage temperature is 25 ~ 60 C.


-
-