33-T0063

This method, in the EN standard, covers the determination of the maximum dry density and water content of cohesionless materials when compacted using a vibrating table. Materials for which yhis method is applicable may contain up to 12% by mass fines (<0.063 mm). The maximum particle size of the materials to be tested is 80 mm. This method applies to mixtures to be used in road construction.

EN 13286-5 standard:
33-T0063/3: Cylinder mould: dia. 280±1 mm
33-T0063/4: Guide sleeve: dia. 280±1 mm
33-T0063/6E: Surcharge base plate: dia.277mm
33-T0063/8E: Surcharge weight: for dia. 280±1 mm cylinder mould

ASTM D4253,4254 standard:
33-T0063/3: Cylinder mould: dia. 279.4±13mm
33-T0063/4: Guide sleeve: dia. 279.4±13mm
33-T0063/2: Cylinder mould: dia. 152.4±13mm
33-T0063/5: Guide sleeve: dia. 152.4±13mm
33-T0063/6: Surcharge base plate: dia.276mm
33-T0063/7: Surcharge base plate: dia.151mm
33-T0063/8: Surcharge weight: for dia. 279.4±13mm cylinder mould
33-T0063/9: Surcharge weight: for dia. 152.4±13mm cylinder mould

TECHNICAL PARAMETERS

Amplitude range: 0-2mm(adjustable)
Vibrator type: electromagnetic
Table size: 600x800mm
Vibration time range: 0-99 Hours
Power: 220V, 1.5Kw
Net weight: 350Kg